Wireless Connection Not Working? You Need to Troubleshoot Your Router

Home automation works well when you have a wireless network, which means you need to install a router to share the internet. This internet connection is the one that allows you to monitor or manage devices remotely. However, just like any other computerized platform, your wireless connection might develop problems and prevent you from accessing your devices. When this happens, you can perform several steps to troubleshoot router problems.

Restart the Router

If your online interfaces are taking long to load or are failing to load completely, connections keep dropping or the wireless connection isn’t working as you expect, a reboot might be the solution to your problems.

Rebooting the router is simple, just unplug the power cable and give it a minute or two then plug the cable back. If the modem is separate from the router, you should also unplug the modem from the port for some time. Try to reconnect and see whether the network has improved.

Check whether the Connections are in The Right Place, and If They are Working

This might sound easy to do, and you might overlook it most of the times. Well, you need to check whether all the cables are in the right place. If you stay with kids, they might have pulled the cables out intentionally or by accident. Make sure you check all the cables and make sure that they are properly connected.

Cables are just like any other electrical component – they can be spoilt while in use. Make sure the power cable is working, and the router is blinking. You can test the router with another wall socket because wall sockets also get spoilt.

Find a New Position for the Router

Your wireless signal might be getting blocked by a wall or any other barrier. Try repositioning the router and see whether the signal improves or not. Some of the culprits, in this case, include microwave ovens and some cordless phone types.

Re positioning also requires you to correct the alignment of the antenna. Make sure the antenna is vertically aligned because it then gives you the widest coverage in this position.

Reset Your Router

At times, the configuration of the router might affect the way your devices connect. You might try and reset the configuration to the default settings and configure afresh. It might be possible that some of the settings have changed or have been deleted from your router.

Resetting your router will also work if you have lost the password and your can’t get back into the router. Most routers come with a tiny reset button located at the back of the device. It can be a red button or just a hole that requires you to poke a pin so that you can press the button for between three and five seconds.

In this case, you will have a clean configuration to work with, but the downside is that you lose all the settings you had used in the previous configuration.

Determine the Optimum Wireless Channel for Your House

If you stay in an area where nearly every home has a wireless router, you might become a victim of wireless interference. If most of the routers in the vicinity are using the same channel, you will most definitely have poor connectivity issues. Determine the available channels in your area and discover the optimum channel that isn’t congested. Being on a less congested channel reduces wireless interference thus enhancing your wireless signal.

You can analyze the wireless signals and their performance using the Wi-Fi Analyzer app. Download and install it on your Android device.

Reduce the Number of Devices Accessing the Router

Your devices might be undergoing “suffocation” from other devices that use up a big chunk of the bandwidth. The biggest culprits, in this case, are gaming consoles. These consoles take up most of your bandwidth and might prevent your smart devices from having a piece of the pie. Make sure you disconnect some of the devices, or you increase your bandwidth to cater for a large number of devices.

Upgrade Your Firmware

This is the final solution when everything else has failed. If you find that you are restarting the router over and over again and it is not working, you need to upgrade the firmware that the router runs on. You can get an updated version from the manufacturer or use an open source alternative. Using an open source alternative gives you a host of features that aren’t available with the standard firmware. Be careful when upgrading the firmware because it might result in serious consequences.

Conclusion

Without a stable wireless connection, your home automation systems will not work correctly. When everything fails, you have to buy another router to replace the existing one. If you seek a replacement router, dig this and see what features you need and how they come into play to enhance your connectivity experience.